Field
of Application
Pyroplex® FS30 Glazed Screen System has been specifically
designed for timber glazed screens in the following applications:
• For use on insulating and non-insulating glazed screens.
• Large aspect ratios for landscape and portrait panels.
• Suitable for use in conjunction with softwood and hardwood
frames and beads.
• Suitable for pin or screw fixings.
Product
Features
•Pyroplex® FS30 is an intumescent gasket which when exposed
to elevated temperature, expands into the glazing pocket, to
provide 30 minutes fire resistance in timber screens.
• Pyroplex® FS30 is a low pressure multi-directional
forming intumescent.
• Pyroplex® FS30 can be supplied in a range of colours including
black, white, cream and brown.
• Pyroplex® FS30 is supplied in continuous reels for dispensing,
ease of storage and to reduce wastage in cut-offs.
• Pyroplex® FS30 is supplied, with a high performance selfadhesive
sealing system for ease of application and installation.
• Pyroplex® FS30 Glazed Screen System does not need to be
secured with either mastic or sealant.
Product Data
| Part No |
Glass Thickness |
Fire Resistance |
Glass Type |
| 30049 |
5-7mm |
30 Minutes |
Non-insulating glass Insulating glass |
|
Product Testing
Pyroplex FS30 Glazed Screen System hyas been tested to the requirements of British Standard BS476: Part 22: 1987, Clause 10 in compliance with CERTIFIRE Technical Schedule TS25.
| Certification |
| CERTIFIRE CF651 |
| Warringtonfire 178457, 17688 |
|
|
Health and Safety Information
For detailed information on this product please refer to the relevant Material Safety Data Sheet which is avaliable on request or downloadable at www.pyroplex.com
Transportation and Storage
Transport Hazards: No regulations apply for the transport of this material. Not classified as hazardous for road, rail, sea or air transport.
Storage: Store in a cool, dry place (not above 35°C) and ensure sufficient ventilation.
Product Guarantee
Providing the product is installed in accordance with the requirements of the guidance document the product is guaranteed for a period of 10 years.
Product Traceability
All Pyroplex products are identified with a unique reference number for traceability purposes.
Installation Instructions
1. Apply Pyroplex FS30 Glazed Screen System to the bead and fix the bead to the frame section, using either 40mm long x 4.1mm diameter screws or 50mm long x 1.80mm diameter pins, both can be positioned at 150mm centres.
2.Position the glass into the aperture and repeat step 1 to secure the glass into the final position.
Quality Approval
Pyroplex Limited has a Quality Management System that meets the requirements of BS EN ISO 9001:2000, and is independantly verified by BSI Management Systems under Certificate Number FM10371. Copies of this approval are avaliable on request.
Additional Information
The information contained herein is based upon the present state of our knowledge.
Recipients of our Pyroplex products must take responsibility for observing existing laws and regulations.
Technical Support and Guidance
Should you require any further information regarding this product please contact Pyroplex Ltd or visit our website, www.pyroplex.com, where you will be able to download Material and Technical Data Sheets.
Due to our policy of continous improvement Pyroplex Limited reserves the right to amend specifications without prior notice.
|
