CE Marked Pipe Collar 200 Series

Application: Service penetrations – plastic SWD systems
Fire Resistance Period: 120 minutes
Insulation/integrity: Insulation and integrity
Test Standard: BS 476: Part 20 and BS EN 1366-3
Approval Type: CE Mark 2812-CPR-JA5002/ETA 20/1208, Certifire TS03 Certificate No. CF635

Pyroplex CE Marked 200 Series Pipe Collars have been specifically designed to re-instate the fire resistance of a wall or floor which has been penetrated by plastic flammable pipes used in soil, waste and drainage services.

They will seal closed flammable pipes from 55mm to 160mm diameter and can be face fixed to a wall or ceiling structure. They are suitable for use on concrete and masonry partitions.

Our Pipe Collar series are tested to BS 476: Part 20 and BS EN 1366-3.
They are compliant with the requirements given in Certifire TS03.

View all fire collars

Main Features Product Range Installation Instructions Testing & Certification Product Downloads

Main Features

A fire resistance of up to 120 minutes.
200 series collars have a galvanised steel outer casing.
Tab closing device means collars are easy to fix in place around pipe and rotate or slide into position.
Intumescent material is totally unaffected by water. It is robust, ‘non-flaking’ and difficult to tear.

Field of Application

Pyroplex CE Marked 200 Series Pipe Collar has been specifically designed to prevent the passage of fire and hot gases through:

Concrete and masonry partitions.
Soil, waste and drainage ‘above ground’ applications.

Product Range

Range for concrete and masonry walls and floors

Part No	Pipe materials	Pipe diameter [mm]	Pipe wall thickness [mm]	Collar depth [mm]	No. of fixing lugs	Wall	Floor
PPC55-2M	PVC-u	55	3.2	60	3	EI120	EI120
PPC75-2M	PVC-u	75	3.2	60	3	EI120	EI120
PPC82-2M	PVC-u	82	3.2	60	3	EI120	EI120
PPC110-2M	PVC-u	110	3.2	60	4	EI120	EI120
PPC125-2M	PVC-u	125	3.2	60	4	EI120	EI120
PPC160-2M	PVC-u	160	3.2	60	6	EI120	EI120

All measurements are shown in millimetres [mm].

Installation Instructions

Masonry Wall and Floor Constructions

Further information on the general supporting construction, pipe diameters and pipe wall thicknesses can be referenced in the Declaration of Performance available for a download.

Ensure substrate around pipe is flat and free from obstructions – if necessary make good by using Pyroplex Intumescent Acrylic Sealant around the perimeter.
Release retaining pin and position pipe collar around pipe.
Slide the tab through slot in pipe collar and fold back 180˚ to secure.
Secure pipe collar by drilling holes in structure by using fixing lugs as template. To fix use M8 x 65mm sleeve anchors or 50mm [minimum] expanding bolts. Do not use plastic raw plugs and or plastic sleeve anchors.
When the collar has been securely fitted into place any residual gaps between the collar and the substrate can be filled using Pyroplex Intumescent Acrylic Sealant.

Testing

Pyroplex Limited have carried out numerous independent fire resistance tests to confirm the suitability of the product and to demonstrate product compliance by utilising BS 476: Part 20 and BS EN 1366-3.

Test Standard

Fire – BS 476: Part 20

Fire – BS EN 1366-3

CE Mark 2812 – CPR-JA5002/ETA 20/1208

Approval Type

Certifire TS03 Certificate No. CF635

CE Marking

EC Certificate of Conformity 2812-CPR-JA5002

Product Downloads

CE Marked 200 Series Pipe Collars

Declaration of Performance

ETA 20-1208

Certifire CF635

Certificate of Constancy of Performance 1121-CPR-JA5002