Test Standard
EN 1366-3
- Pyroplex® 200 Series SL Pipe Collars have achieved a fire resistance of up to 120 minutes
- Pyroplex® 200 Series SL Pipe Collars have a zintec coated steel outer casing
- Embossed for identification and tracebility purposes
- Tab closing device means the collars are easy to fix in place around the pipe and rotate or slide into position
- Intumescent material is totally unaffected by water, is robust, ‘non-flaking’ and difficult to tear
Pyroplex® 200 Series SL Pipe Collars have been specifically designed to prevent the passage of fire and hot gases through:
- Concrete and masonry constructions – Suitable for plasterboard partitions 55mm to 160mm
- Soil, waste and drainage ‘above ground’ applications
- Suitable for plastic flammable pipes with PVC-C, PVC-U, PE, PP, ABS and SAN+PVC pipes
| Part No | Pipe diameter [mm] | Collar depth [mm] | No. of fixing lugs | Product Quantity per pack |
|---|---|---|---|---|
| PPC55-SL | 50 | 30 | 3 | 100 |
| PPC75-SL | 75 | 30 | 4 | 75 |
| PPC82-SL | 82 | 30 | 4 | 75 |
| PPC110-SL | 110 | 30 | 5 | 50 |
| PPC160-SL | 160 | 45 | 6 | 16 |
All measurements are shown in millimetres [mm].
Masonry Wall and Floor Constructions
Further information on the general supporting construction, pipe diameters and pipe wall thicknesses can be referenced in the Declaration of Performance available for a download.
1. Ensure the substrate around the pipe is flat andfree from obstructions – if necessary make good by using Pyroplex® CE Intumescent Acrylic Sealant around the perimeter.
2. Release the retaining pin and position the pipe collar around the pipe.
3. Slide the tab through the slot in the pipe collar and fold back 180˚ to secure.
4. Secure the pipe collar by drilling holes in the structure by using fixing lugs as a template.To fix, use metal sleeve anchor M6 x 65s or CE marked alternative anchors.
Do not use plastic raw plugs and/or plastic sleeve anchors.
5. When the collar has been securely fitted into place, any residual gaps between the collar and the substrate can be filled using Pyroplex® CE Intumescent Acrylic Sealant.
Flexible Partition Walls
Flexible partitions – fully insulated or insulated partitions. Refer to Declaration of Performance which define the field of application for the supporting construction.
1. Ensure the substrate around the pipe is flat and free from obstructions – if necessary, make good by using Pyroplex® CE Intumescent Acrylic Sealant around the perimeter.
2. Release the retaining pin and position the pipe collar around the pipe.
3. Slide the tab through the slot in the pipe collar and fold back 180˚ to secure.
4. Secure the pipe collar by drilling holes in the structure and using fixing lugs as a template. To fix, use Fishcer HM 6 x 65s or CE marked alternative anchors.
5. When the collar has been securely fitted into place, any residual gaps between the collar and the substrate can be filled using Pyroplex® CE Intumescent Acrylic Sealant.
Pyroplex Limited have carried out numerous independent fire resistance tests to confirm the suitability of the product and to demonstrate product compliance by utilising EN 1366-3. EN Classification report 412471 is available on request.
Providing the product is installed in accordance with the requirements of the guidance document, the product is guaranteed for a period of 10 years.
