Test Standard
BS 476: Part 22: 1987 – fire
Approval Type
Certifire TS25 Certificate No. CF348
Mid East Certification Scheme Cert. Ref. ME0042 and ME0045
- Supplied on continuous reels for dispensing applications, ease of storage and to reduce wastage in cut-offs.
- Supplied with a high performance self-adhesive backing for ease of application and installation.
- Pyroplex® intumescent material is totally unaffected by water, robust, ‘non-flaking’ and difficult to tear.
- Available in graphite colour.
Pyroplex® FG30 30 Minute Glazing Systems have been specifically designed for use in glazed apertures in fire resisting timber doors and steel doors.
| Part no. | Glass thickness | Glass type | Metres on coil | Fire resistance |
|---|---|---|---|---|
| 8193 | 5-7mm | Non-insulating /Insulating | 100m | 30 minutes |
All doors must be lined with a 6mm hardwood liner around the perimeter of the aperture. Failure to line the aperture will invalidate the Certifire approval.
1. Unwind the glazing system from the coil. Remove the release liner from the product. Fit the product to the bead.
2. Mitre cut the bead [with glazing system installed] to fit the aperture. Install one complete side of the beading system using M5 x 50mm stainless steel screws at 150mm centres.
3. Cut glass to fit aperture with a tolerance of +/-2mm and install. Repeat steps for opposite side of the door.
Pyroplex® FG30 30 Minute Glazing Systems have been tested to the requirements of Certifire TS25 and other international standards, including British Standards BS 476: Part 22: 1987.
Providing the product is installed in accordance with the requirements of the guidance document the product is guaranteed for a period of 10 years.
